SKU: JO-ED-45
A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special break when stops the forward motion of the piston & die when the trigger is released.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
Recommended for: Electrical Work, Telecommunications, Aerospace, Automotive Industries.
Battery Cable Cutter ED-45
The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
A Temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
The crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of no operation, the tool is always ready to operate. In addition, we see a lower power-weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
Specifications
Cutting Force 60KN
Stroke 50mm
Cutting range Φ85mm (Cu/Al cable and armored cable)
Crimping cycle 70 times
Battery voltage 18V
Battery capacity 3.0 Ah
Charging time 2 hours
Package Plastic box
Blade 1pc
Battery 2pcs
Charger 1pc
Sealing ring of cylinder 1set
Sealing ring safety valve 1set
We provide premium Hydraulic Tools:
To Make Your Job Easier!
SUMA TOOL products co., Ltd
provides Hydraulic Tools To Make Your Job Easier.
We will contact you within 1 working day, please pay attention to the email with the suffix “@sumatool.com”.
